Chase Research IOPRINT+ Print Server Betriebsanweisung PDF herunterladen (Seite 89)

Windows NT Server (TCP/IP)

Page 89

Chapter 2 Installation and Configuration

Command Line

To print a file from the command prompt, type:

lpr -S NT_Host -P printer_name file_name

Where:

NT_Host is the name of the NT host on which the remote printer is configured.

printer_name is the name assigned to the remote printer

file_name is the name of the file you wish to print.

To check the print status, type:

lpq -S NT_Host -P printer_name

Telnet

Telnet can be used to monitor the status of the printers attached to the IOPRINT+ Print

Server.

Operation

Establish a connection to the IOPRINT+ Print Server, by starting your Telnet program and

providing the IP Address of the IOPRINT+ Print Server. (No port number is required.)

It will respond with "Welcome to Print Server".

From the resulting prompt, 3 commands are possible:

• Help: Show brief help

• Monitor: show printer status

• Exit: leave telnet

Monitoring

The "Monitor" command will show the status of the printer, on each port, as shown in the

following example.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 304 305

Keine Kommentare

Chase Research IOPRINT+ Print Server Betriebsanweisung Seite 89